# Figures of journal note 28 (protocol 025, the decision map)

Both figures are drawn by `draw_map.py` from `decision-map.csv`, which `make_map_csv.py` wrote from this package's
`results/map-a.json`. No other input, no image generator.

## Figure 1: `decision-map` (`.png`, `.svg`; data `decision-map.csv`)

**Caption.** The decision map of the three fresh network instances (pynn_seed 15, 16, 17). Signal A is a grating at
45°, signal B one at 135°; each cell is one pair of strengths (contrasts in percent). The number is the mean decision
variable v over the cell's steps, and below it the actions those steps took (four steps per cell; eight in the grey
screen, A 30 and B 30 cells, which calibrate the instance). Outlined cells were scored: all 168 scored steps took the
intended action. The cells one grid step off the diagonal, and one signal alone at 7.5 %, are the transition zone and
were described only. Simulation only.

**Alt text.** Three 5 by 5 grids titled "The intended action in every scored step of three fresh instances", one per
instance 15, 16 and 17. Horizontal axis: strength of signal B, 0 to 30 percent; vertical axis: strength of signal A,
0 to 30 percent. Cells are coloured from amber (v near minus 1, action A) through pale (v near 0, hold) to violet (v
near plus 1, action B). In every grid the diagonal is pale with v between minus 0.07 and plus 0.04 and the label
hold; the upper left triangle is amber with v from about minus 0.3 to minus 1.07; the lower right triangle is violet
with v from about plus 0.25 to plus 1.02. Cells next to the diagonal carry mixed labels such as "1 hold, 3 B" or
"3 A, 1 hold"; A alone at 7.5 reads "2 A, 2 hold" in all three.

## Figure 2: `decision-diff` (`.png`, `.svg`; data `decision-map.csv`)

**Caption.** The same cells against the difference of the two strengths (B minus A). Each point is one cell of one
instance: the mean of v over its steps, with the range of the steps as a line. Filled points are scored cells, open
points the transition zone. Dashed lines: the thresholds at ±0.32. Points at the same difference are spread sideways
by instance and by total strength so that they do not overlap. The grey-screen, A 30 and B 30 cells, which calibrate
the instance, are not drawn.

**Alt text.** Dot chart titled "The decision follows the difference of the two strengths". Horizontal axis: strength
of B minus strength of A, from minus 30 to plus 30 percentage points; vertical axis: decision variable v from minus
1.5 to 1.5, with a shaded hold band between dashed lines at minus 0.32 and plus 0.32. Filled dots: at minus 22.5
around minus 0.9; at minus 15 around minus 0.65 to minus 0.8; at 0 between minus 0.07 and plus 0.04, inside the band;
at plus 15 around plus 0.55 to plus 0.8; at plus 22.5 around plus 0.75 to plus 1.02. Open dots at minus 7.5 lie
between minus 0.29 and minus 0.55 and at plus 7.5 between plus 0.25 and plus 0.44, straddling the dashed lines.

Model: 2 mm reduction of LSV1M (Antolík et al. 2024, CC BY 4.0), simulated with Mozaik and NEST 3.4.
