# Captions, journal note 24

## Figure 1: cell2738

Files: `cell2738.png` (1920 x 1200), `cell2738.svg`, `draw_cell2738.py`, `make_cell2738_csv.py`, `cell2738-trains.csv`, `cell2738-summary.json`.

**Caption.** Figure 1. Spike times of one LGN OFF cell, number 2738, in protocol 023's run s7 and in two later exact repeats of its inputs, d5 and rate-r1, over the first 15 s of the 35 s stimulus sequence. The top row is the pilot's lead-in reference, which holds only the first 504 ms. Violet, taller ticks are the 41 s7 spikes with no d5 spike within 5 ms, and the numbers above give s7's spikes minus d5's in each second. The dashed line marks 14,344.6 ms, from which s7's train equals d5's to the end of the sequence. Lower left: the lead-in that the protocol's check compared, where s7 has 5 spikes and the others 3. Lower right: the trains around that point. The figure shows that this one cell fired differently in s7 than in repeats of the same inputs, for 14.3 s. It does not show the cause, the other cells (no other LGN cell differs; every cortical train differs, downstream of this one), or anything about cat cortex. It is exploratory and changes nothing in the protocol's declared outcome, NOT INTERPRETABLE.

**Alt text.** Spike raster titled 'Cell 2738 fired extra spikes in s7 until 14.3 s'. Four rows of vertical ticks over 0 to 15 seconds: the pilot reference, with three spikes in the first half second only, then s7, d5 and rate-r1. The d5 and rate-r1 rows are identical. The s7 row has the same bursts as d5 plus extra spikes, 41 of them marked in violet, spread from the start to about 14 seconds. Numbers above count s7's spikes minus d5's in each second: between +1 and +7 in each of the first 14 seconds, then +0. A dashed line at 14,344.6 ms marks where the s7 train becomes identical to d5's. A lower left panel shows the first 504 ms: the reference, d5 and rate-r1 have spikes at about 73, 120 and 271 ms, and s7 has five, at about 73, 77, 116, 153 and 270 ms. A lower right panel shows 13.9 to 14.7 seconds, where the three rows are identical after the dashed line.

**Attribution.** Model: 2 mm reduction of LSV1M (Antolík et al. 2024, CC BY 4.0), simulated with Mozaik and NEST. The figure is plotted by matplotlib from Felisyn's retained records: the lead-in reference of protocol 023 (`protocol-023-public/frozen/leadin-reference-023.json`, the pilot's intact export), and the diagnosis's comparisons `diagnosis/runs/d5-s7repeat/vs-s7.json` and `diagnosis/runs/rate-r1/vs-d5.json` with its recount `diagnosis/recount/a2.log`. It reads no export. The runs are named by their exports' SHA-256 in `cell2738-summary.json`. It is a plot of simulation data, not an illustration, and it was not made with an image generator. Set in Latin Modern Roman (GUST Font License).

To redraw it from this folder, with the site's web font (`/assets/fonts/lmroman-regular.woff`, needs fontTools):

    python3 make_cell2738_csv.py ../../protocol-023-public/frozen/leadin-reference-023.json ../diagnosis/runs/d5-s7repeat/vs-s7.json ../diagnosis/runs/rate-r1/vs-d5.json ../diagnosis/recount/a2.log .
    python3 draw_cell2738.py --font lmroman-regular.woff

The first script stops if the records disagree with each other, and the second if the CSV and the summary disagree. Without `--font` the figure falls back to STIXGeneral.
